ExtremeSwitching (EXOS/Switch Engine) - Page 431 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

X440-G2 will not forward mac address info , over shared 10gig port , to X670 running mlag.

I have a very basic configuration , from an X440-g2 licenced to use the 10Gig ports ( shared ) connected to 2 x 670 units running mlag , the x440 share is basic L2 and is static ( no lacp ) So the voice vlan is tagged at both the x440 and the 2 X67...

SG5201-0848-F6 spaning tre problem

Dear all i have a big problem, every seconds my topology changes i think i got spaning tree in some switches, can someone help me how to find it 2017-06-12 17:30:58 Local0 Notice 10.10.7.37 Jun 12 17:30:56 10.10.7.37 NOTICE: Topology c...

Enable Bootprelay on switch stack

I am unable to configure bootprelay on a switch stack running 21.1.1.4. I've got the configuration in there, but when I try to add a VLAN it gives me the following: ERROR[Lib_WiFi]: Can't enable BOOTP/DHCP client, as an IP address is configured. Co...

Failing Address

Does anyone knows what's causing this error? 05/22/2017 07:12:51.95 Failing Address: 0x000000006aadb730, Data: 0x0000000000000000 05/22/2017 07:12:51.95 LMC0 ECC: syndrome: 0x9b 05/22/2017 07:12:51.95 LMC0 ECC: Failing column: 0x36d6 0...

440 G2 POE+ not working to Extreme Wireless 3935i

Hi Community It would seem that the Extreme 440-G2 does not detect the power requirements for a Extreme 39xx series AP correcly. With default config on the switch the Switch provides 802.3af power to the AP. This results in the AP operating in lowe...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN