Cant access Extreme Stack using SSH any longer
Hi All, We can no longer access the Extreme Stack using SSH and can only access using the GUI. Everything was working before. Any suggestions guys, please? Regards, Mykhaylo
Forum Posts
Kern.Alert>CPU 1 Unable to handle kernel paging request at virtual address 0000000000000000, epc == 0000000000000000, ra == ffffffffc057a1b0
Crit:Kern.Alert> CPU 1 Unable to handle kernel paging request at virtual address 0000000000000000, epc == 0000000000000000, ra == ffffffffc057a1b0 We have an X480-48X switch , we have changed the hardware by RMA and upgraded the code to the advised ...
computers lose connectivity after 15 minutes
Hello, 2 computers on same subnet can see each each other or can ping but after 10 to 15 minutes they lose the ping and no connectivity is seen between them.. there is no configuration on switch all ports are in default vlan. it is happening with 4 s...
Cisco ios to exos policy based routing
Hi all im quite new to Exos and i would like some help migrating from policy based routes from cisco ios to exos... my extreme version is 21.1.1.4 --------------------------------------------------------------------- These are the policy i have co...
Why are green LEDs blinking on ports that are not UTP connected?
UTP is not connected but the green LED is blinking on the port. Disabling a port will also mark the link status as active. I have treated the equipment three times with the same symptoms, but I get the same symptoms. I wonder how these symptoms come ...
