port down due to vlacp
one uplink not comming UP due to vlacp operationally down but admin up.
one uplink not comming UP due to vlacp operationally down but admin up.
Hello community,I'am using 2 x456-24s Extreme Fiber switches. I've read that those switches should support 100BASE-X, but in my case they wont.I think maybe i have wrong SFP modules - i have tried EDGE sfps (i've had positive experiences between edge...
Stack of two 5420F-48P-4XE running 31.7.1.4 - brand new setup, new config. If I save the config (successful save, no issues), then reboot the stack, upon login the CLI prompt shows* Slot-1 4th-stack-new.2 #as if there's a config change pending (the ...
I have a problem. I've got an X460-48p which I am doing a port mirror session on, aiming to capture some DHCP traffic to troubleshoot an issue. I am aiming to capture traffic between a source PC and a destination DHCP server. I have set the mirror co...
Hello,I've got a VMware Host with 2 x 10Gb going into 2 X670V switches (1 port in each) where I set them up as a MLAG (LACP). I've done this before and the port on the switches are usually the same, for example if it's port 10 on both switches I wou...
User | Count |
---|---|
28 | |
24 | |
18 | |
16 | |
16 |