Hello Community, i have a loop in my network, the switch sample this log
Toggling AdminState on Port 13 with pif 0x5c9ca0
Someone else has had this log. The version is 16.1.4.2 patch1-7.
After a lot of unsuccessful tries to build a VM lab with 5 switches in EAPS ring and other 2 in a ERPS subring of the main ring, I started to capture packets in VirtualBox and found out that the switches are absorbing the R-APS packets instead of for...
Hello, team!
I've configured IPs for MGMT-ports of all my Exteme switches and connected them to dedicated 2960. Ping works fine but I am unable to connect to the switches with SSH or telnet.
Is it possible?
Thanks!
Hi!
Is it possible to block relayed DHCP request that doesn't contain a specific option60 or a specific range of customers source mac-adress (inbedded in the DHCP request, not source mac because the requests are relayed) in a ACL?
With regards
Mat...
Hi all,
I am just looking at using extreme as edge switches, have been using them for core and aggregation for years. We have a large network with two central DHCP servers which we then use UDP forwarding from each user vlan.
As I see it, we need ...
