ExtremeSwitching (EXOS/Switch Engine) - Page 493 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Default route not coming out of routing table in NSSA when link down

Hi, I have a problem with a re-distrubuted static route which I think I have nailed down to being a problem with the NSSA setting on the remote area. We have the following topology; There are point to point links between the CORE and WAN and also...

Export direct and static to one bgp neighbor

Is there any way to only export direct and/or static to a specific neighboor ? I can't figure out if I can do it in a route-policy or not ? I do not want to do it for the general bgp process. ( I would have to rewrite alot of export policys then ) ...

How to activate ports 49-64 on X670-G2?

Switch: X670-G2 FW: 21.1.14 Hi guys, I would like to add some ports (49 to 56) to the switch using two OSPF 4x10G Modules. When inserted the two modules I see the following: Port Summary Monitor Thu Dec 1 09:07:50 2016Port ...

DHCP-Snooping, ARP validation with port specific tags.

Hi, I have a case where i can't get DHCP-Snooping with ARP validation working when using port specific tags. In my homelab i've used the following settings (which work): - DHCP server on port 6. - Client on port 10. * config lines: configure truste...

WoL Implementation - Updated?

Hi All, I have found some information on implementing WoL (Wake on Lan) in EXOS, but its a few years out of date. Is it still current? How comes this isn't built into EXOS or is it that the specific routing protocols don't allow for the functional...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN