ExtremeSwitching (EXOS/Switch Engine) - Page 505 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Layer3 802.1ad interface

I'm trying to figure out how to create a Layer 3 q-in-q interface in Exos on a summit X440 switch. I've opened a ticket with support but I'm not getting anywhere so if anyone in the community can help I'd appreciate it. If I need special licensin...

Links using SFPs from RAD in rear ports of X440-G2 don't become active

Trying a SFP from RAD in a Extreme X440-G2-24t-GE4. using the SFPs in the back of the chassis. When connected the state on the switch is Enable Ready. When I put the SFPs in a 440-G2-24P the ports come active and I am able to communicate with them....

command for local packet capture on x460 v16

Found this article but this command doesnt exist:https://extremeportal.force.com/ExtrArticleDetail?an=000082238

How to disable auto completion commands in CLI

Is there a way to disable auto completion commands in XOS? for an e.g., show configuration instead of sh conf

Extreme Summit Switches Upgrade Patch

Hi All, I am going to upgrade the Extreme Summit Switches x460 from 12.5.4.5 to 16.1.3.6. Is that any required path need to achieve first or can directly upgrade from 12.5 to 16.1 within one step? Thanks for your help. Best regards, Chia Hong

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN