ExtremeSwitching (EXOS/Switch Engine) - Page 532 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

About the remote-mirroring packet for XOS

Hello All, I have a question about the remote mirroring behavior for EXOS. When Extreme switch transfers a packet for remote mirroring, is the mirroring packet a software forwarding? Or software forwarding? I think that Extreme switch is using the h...

MLAG VRRP Member Switch Connection

Good Evening, I was testing a MLAG/VRRP setup today and couldn't get a member switch LAG to connect to the two cores. The two cores seem to be working correctly, they are able to ping each other and the VRRP address that is configured. When I do a...

DoS-Protect Implementation Issue...

We are facing some issue with TCP Synflood in our Network. Now we are trying to implement DoS-Protect to prevent this. We have enabled the DoS-Protect in Extreme Switch. But, we are not getting any logs related to DoS-Protect. But, We have check t...

MSM-A: Notify-threshold for L3 Protect packet count of 3500 reached

if I try to connect a new access switch (Summit X440-48) to the core switch (BD8006) I read after some minutes the following entry in the log file: MSM-A: Notify-threshold for L3 Protect packet count of 3500 reached MSM-A: Added an ACL to port 4:1, ...

X460-G2 connecting 10 meter DAC Cable possible ?

we want to uplink several X460-G2 switches via 10 meter Copper DAC Cable to a S4. But it seems not working. Does anybody know if the X460-G2 10Gb optic ports have the needed PHY unit to get 10m Cables runnig ?? Behaviour: S4 port Link is Up / X460-...

Top Kudoed Authors

User

Count

28

28

20

20

17

GTM-P2G8KFN