ExtremeSwitching (EXOS/Switch Engine)
Questions and discussions about EXOS
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Radius configuration for extreme

hi,I want to configure radius client on extreme switch,below command i used for configuration configure radius netlogin primary server 192.168.X.X 1812 client-ip 192.168.x.x vr VR-Defaultconfigure radius netlogin primary shared-secret enryptedenable ...

Capture.JPG
Nakul by New Contributor
  • 103 Views
  • 2 replies
  • 0 kudos

PoE ports delivering insane power

We have a switch that has 4 ports that are delivering high levels of power and it is causing other PoE ports on the switch to consistently power cycle the devices on them.  Here is the inline power log for that switch:# show inline info port 3:1-48Po...

Mark_Eby by New Contributor
  • 169 Views
  • 1 replies
  • 0 kudos

Speed of vSwitch (Heeeelp)

Hi Guys!I'm having some issues with my implementation. I'm using GNS3 to virtualize the EXOS SW (IMG 32.1.6) for creating this topology. My external link operates at 80Mbps, but when I test the speed within my network, such as under D1 or D2, I only ...

Joao_0-1684856687517.png Joao_1-1684856811461.png
Joao by New Contributor
  • 152 Views
  • 2 replies
  • 1 kudos

OSPF neighbour issue

Hi, I have two switches that will not become OSPF neighbours. They are setup as follows:Stack 1 needs to form an OSPF relationship with Unit 2. Stack 1 is running ExtremeXOS version 31.7.1.4Unit 2 is running ExtremeXOS version 16.2.5.4Everything abou...

MartinS_1-1684418303648.png
MartinS by New Contributor III
  • 227 Views
  • 4 replies
  • 1 kudos
GTM-P2G8KFN