Cannot disable ports on master node X690
Hello,I cannot seem to disable ports on master node. Switch model is X690. Any help would be appreciated.Thank you.
Forum Posts
Radius configuration for extreme
hi,I want to configure radius client on extreme switch,below command i used for configuration configure radius netlogin primary server 192.168.X.X 1812 client-ip 192.168.x.x vr VR-Defaultconfigure radius netlogin primary shared-secret enryptedenable ...
PoE ports delivering insane power
We have a switch that has 4 ports that are delivering high levels of power and it is causing other PoE ports on the switch to consistently power cycle the devices on them. Here is the inline power log for that switch:# show inline info port 3:1-48Po...
Speed of vSwitch (Heeeelp)
Hi Guys!I'm having some issues with my implementation. I'm using GNS3 to virtualize the EXOS SW (IMG 32.1.6) for creating this topology. My external link operates at 80Mbps, but when I test the speed within my network, such as under D1 or D2, I only ...
OSPF neighbour issue
Hi, I have two switches that will not become OSPF neighbours. They are setup as follows:Stack 1 needs to form an OSPF relationship with Unit 2. Stack 1 is running ExtremeXOS version 31.7.1.4Unit 2 is running ExtremeXOS version 16.2.5.4Everything abou...
