ExtremeSwitching (EXOS/Switch Engine) - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

[EXOS 33.5.2.118] 25G SFP28 ports permanently down after power outage on 7520-48Y-8C — tx_disable la

Environment— Core: Extreme Networks 7520-48Y-8C running EXOS 33.5.2.118-patch3-1— Access: Extreme Networks 5520 / 5720 series— Link: 25G SFP28 fiber between core and access switchesProblemAfter any power outage (accidental or planned maintenance), th...

Resolved! EXOS 31.7 BGP dynamic neighbors.

Hello,May I ask if EXOS 31.7.3 supports BGP dynamic neighbour range, please; namely, specify a network on which the BGP neighbours are, rather than individual addresses?Below is the config that I ran in; but I was stumped trying to find how to config...

prevent EXOS from sending traps for netlogin sessions

I've EXOS and SwitchEngine switches running 32.7.2 and 32.7.3. Fully integrated in XIQ-SE and Control (NAC). The switches are permanently sending snmp traps/inform for succeeded and failed netlogin sessions.Traps for link-up/down are still disabled.H...

Resolved! EXOS on GNS3 not booting past BusyBox

Trying to boot EXOS v32.6.3.126 on GNS3 v2.2.50 running as a VM on Hyper-V and cannot get past BusyBox. I don't see anything on the tutorial site about this. The only warning I see during boot is about the CPU:Warning. Could not determine the CPU Fam...

Schedule a script

Create Date: Nov 26 2012 9:33PM Is there a way I can schedule a script to disable some ports in the night and re-enable them again. I want to reboot a POE device every night. di inline-power port X en inline-power port X This should do it but I a...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN