Hi,
I was staging some v.300 (about 100) and I noticed the some come with a version newer (1.4.0.23) that the one I need (1.4.0.21).
I have auto-upgrade active on the CB.
When the v.300 tries to upgrade it gives the following message:
09/27/2023 16:14:24.72 <Info:vlan.msgs.portLinkStateUp> Slot-1: Port 1:1 link UP at speed 1 Gbps and full-duplex
09/27/2023 16:14:26.22 <Info:vlan.msgs.portLinkStateDown> Slot-1: Port 1:1 link down
09/27/2023 16:14:28.64 <Info:vlan.msgs.portLinkStateUp> Slot-1: Port 1:1 link UP at speed 1 Gbps and full-duplex
09/27/2023 16:14:29.15 <Info:HAL.Card.Info> Slot-1: Module in Slot-100 is inserted
09/27/2023 16:14:29.17 <Noti:DM.Notice> Slot-1: Slot-100 being Powered ON
09/27/2023 16:14:29.18 <Info:HAL.Card.Info> Slot-1: VPEX BPE slot 100 Active image VER 1.4.0.23, recommended VER 1.4.0.21
09/27/2023 16:14:34.47 <Info:LACP.AddPortToAggr> Slot-1: Add port 1:1 to aggregator
09/27/2023 16:14:34.87 <Info:HAL.Card.Info> Slot-1: Upgrading VPEX BPE slot 100 image from ver 1.4.0.23 to 1.4.0.21 - Attempt #2 out of 3
09/27/2023 16:14:34.88 <Erro:tftpd.err> Slot-1: received error packet: 0: Closed by application
09/27/2023 16:14:34.88 <Erro:HAL.VPEX.Error> Slot-1: TFTP download failed for VPEX BPE slot 100
09/27/2023 16:14:35.38 <Info:vlan.msgs.portLinkStateDown> Slot-1: Port 1:1 link down
09/27/2023 16:14:35.38 <Info:vlan.dbg.info> Slot-1: Port 1:1 is Down, remove from aggregator 1:1
09/27/2023 16:14:35.38 <Info:LACP.RemPortFromAggr> Slot-1: Remove port 1:1 from aggregator
09/27/2023 16:14:36.15 <Info:HAL.Card.Info> Slot-1: Module in Slot-100 is removed
09/27/2023 16:14:36.15 <Info:HAL.Card.Info> Slot-1: Slot-100 down, resetting all TCP connections to it
How do I downgrade a BPE.
Regards,
Jose Chaves
