cancel
Showing results for 
Search instead for 
Did you mean: 

Howto mirror a mlag in an EAPS ring

JohanH
Contributor II
I have an EAPS ring with x670-G2-48X switches. Connected at the core there is a MLAG configuration.

How can I mirror both links ?

4f7305ad68174410920980217d56e406_56d2f1f7-2fba-4b54-951e-8afa0659ca11.png

Johan Hendrik System Architect Audax
5 REPLIES 5

JohanH
Contributor II
Stephen, I cann't create a remote mirror to an EAPS port.
Johan Hendrik System Architect Audax

JohanH
Contributor II
thanks for your advise
Johan Hendrik System Architect Audax

StephenW
Contributor II
I would probably use remote mirroring in the article i attached. It dumps the traffic into a mirror vlan you create. For the left switch you can use the below command.

configure mirror to port 5 remote-tag

JohanH
Contributor II
Hi Stephen,

Yes, I found this document too. Only….
When I create a mirror at the left switch, there is no vlan configured at the mirror port. According the document i have configure the vlan untagged to that port.
Johan Hendrik System Architect Audax