vlan statistics

[popeye]

I have 2 similar devices x670-48x, image ver: 15.6.3.1.

On the first of them I can create filter for vlan statistic 1024 times while on another one I can do it only 230 times. If I try to create one more filter I get an error:

07/15/2019 15:59:23.91 Unable to add filter for transmit statistics on VLAN [Vlan_Name] port [Port_Number]

Filter I'm creating via command:

configure ports all monitor vlan [Vlan_Name]

Amount of the entries I'm checking with command:

show configuration | include monitor

Could somebody help me with this? Which factors can impact on amount of the filters?
Thanks.

[popeye]

If I understood right one of the slice at one port I can use only for one type of the configuration.

Slice 4 Rules: Used: 101 Available: 27 VLAN statistics
Slice 5 Rules: Used: 1 Available: 127 user/other
Slice 6 Rules: Used: 12 Available: 116 system

Slice 4 I can use only for "vlan statistics" and slice 5 and 6 I can't use for vlan statistics configuration, right?!

[popeye]

Thanks for your answer. You really helped me.

This switches differently configured and result of "show access-list usage acl-slice port X" on both of switches are totally different.

[Ronald_Dvorak · Accepted solution]

I'm not sure but could it be that it has something to do with the ACL slices....
https://documentation.extremenetworks.com/exos_16/exos_16_2/acl/c_acl-slices-and-rules.shtml

Could you run "show access-list usage acl-slice port X" on both ports on the 2 switches.....
https://gtacknowledge.extremenetworks.com/articles/How_To/how-to-check-ACL-slice-usage-status

-Ron

[popeye]

Both of the switches are the same model x670-48x and with the same image ver: 15.6.3.1