cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

What is the procedure to configure different DHCP addresses for different Vlans through a window server/Linux server in extreme summit 670?

What is the procedure to configure different DHCP addresses for different Vlans through a window server/Linux server in extreme summit 670?

Rajat_Sood
New Contributor
I have diiferent vlans and the DHCP server is made on switch itself.Now I want to migrate that server on a Window/Linux server.How can I do this?
1 REPLY 1

David_Choi
Extreme Employee
Hi Rajat,

If I understood correctly, you should configure "bootprelay" in switch side to send dhcp packet to a DHCP server over source VLAN (where DHCP clients are connected) to destination VLAN (where DHCP server is located).
In DHCP server side, it can recognize the subnet of source IP address and can assign (offer) the appropriate IP address for the subnet from its dhcp pool.

You can refer following articles:

https://gtacknowledge.extremenetworks.com/articles/Q_A/How-does-a-DHCP-server-know-what-lease-pool-t...

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-Bootprelay/?q=bootprelay&...

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-apply-a-bootprelay-dhcp-server-to-a...

BR,
-David
GTM-P2G8KFN