X440-G2 Dual 10GbE Upgrade License Configuration

[aredwan]

Hi all,

I have a X440-G2 switch with Dual 10GbE Upgrade License. i want the step by step configuration on the switch to enable the ports to 10G

Thank you

[Ronald_Dvorak · Accepted solution]

Hi,
here a link to the XOS doumentation page.....

https://www.extremenetworks.com/support/documentation/extremexos-22-7/


... and the "enable license" page from the CLI guide...
https://documentation.extremenetworks.com/exos_commands_22.7/GUID-E03F00CA-D737-4B1B-895D-35DE9E848A...

-Ron

[aredwan]

@jeronimo thank you so much for you help it worked now. i am new to extreme and did not know the cli command for enabling the license.

[jeronimo]

You just use "enable license license-key".

What problem are you facing exactly?

[aredwan]

Thank you for your reply @jeronimo ... i am unable to find a documet for step by step configuration guide. could you please share the documentation.

[jeronimo]

1) You use your entitlement to create a license key for a specific serial number in Licensing Portal.
2) You enter the license into the switch as explained in the documentation.
The ports now miraculously work with 10G speed 