ExtremeSwitching (Other) - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

Chain Configuration on ISW variants with 4 SFP ports

Is it possible for any of the 16xxx Industrial Switch varaiants with 4 SFP ports to be members of more than one chain? I see in the documentation and understand the concept of being a participant in two rings - for example, ports 9+10 in one ring an...

Install new certificate on VOSS 9.2

I am trying to install a new certificate on a VOSS 9.2 switch and I believe v9.1 onwards supports SHA256. When I use these commands to generate a CSR and sign it with our internal CA using OpenSSL, MS Edge displays an "unsupported certificate format"...

Resolved! Industrial Ethernet Switches ISW

Hi, what OS is running on the extreme Industrial Ethernet Switches, EXOS ? , can they be managed by the Extreme managment soft ? Thx.

SR2024 Web GUI and firmware updates

Hello!I just received an SR2024p switch from a friend for my homelab. I am able to ssh into it and console but cannot get the web GUI to start. I saw two other posts on these boards one mentioned my model of switch is CLI based only but another menti...

Resolved! Port partitioning 2x50G problem on 7720-32C

Hi every one According to the documentation, the 7720 switch supports port partitioning 2x50G. However, when I enter the configuration command, it displays the following message:Port 1:1 does not support port partitioning mode 2x50GPlease guide me on...

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN