Could you tell me about question below,By default, when Extreme L2 switch receive an "IEEE802.1Q-tagged Ethernet frame" , forward it to other port or drop it ?
Hi,i tried to configure a extreme switch with two vlans:vlan500- ISP - 10.0.0.20/29vlan3572 - local users - 10.83.72.1/24My default route to this communication is ISP (10.0.0.17). I can ping the 8.8.8.8 with source 10.0.0.20 (ISP) that i can see requ...
Need to recover the admin password. Following this:Procedure 1. Locate the pinhole in the rear side of the switch 2. Hold down the button for at least 5 seconds 3. Login to the switch using any of the default usernames with a blank pa...
Hello,I was wondering whether someone did migrate from a standard 802.1q tagged core like Cisco to a Fabric SPBM with VSP 7400 series and would like to share their lessons learned. Currently:Cisco 4500x cores -- X460G2-10GE4 (distribution / edge)Futu...
