ExtremeSwitching (Other) - Page 70 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

200-Series MAB - EAP in RADIUS Access Request

I have a Problem with a 210-Series Extreme Switch doing MAC-Auth on Ports. I'm getting EAP Fields in the Radius Request and the Radius Server trying to use EAP instead of PEP because of this. Did i do anything wrong? RadiusConfig: authentication en...

2017-11-13: New GTAC Knowledge Articles November 05 - 11, 2017

Here are the new articles that were published November 05 - November 11, 2017 in GTAC Knowledge: Sunday, November 05, 2017: none Monday, November 06, 2017: Does the X670-G2 support 100mb links? Does AirDefense Mobile 64 Bit version 6.x contain VPN ...

Switch stack uplinks to network

I have a stack of 5 X440-48p G2 switches. I want to have a LAG uplink to the network and am wondering if the 2 ports should be on the master and backup? I configured port 1:48 & 5:48 in the LAG but node 5 is just a standby node. Should I fix the LAG ...

Radius Authentication Not Working

Unable to access BD8810 Floor switch using Radius authentication or local authentication. Today, I added a secondary (backup) Radius server to a floor switch. I added the backup Radius server via a browser. To test the backup Radius server, I ...

Lacp lag L3 address

Hello everyone! I have an Extreme switch x620-16x. I need to configure lag port according to source OR destination IP address. So I have to configure as the following commands [configure sharing address-based ...] but the OS cann't recognize the [add...

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN