ExtremeSwitching (Other)
Questions and discussions about switching in general
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

ISW Port Configuration Assistance

Hello,I have an ISW that I'm not too familiar with that I'm trying to configure one port to tag some VLANs and to have one untagged. For example- 123 untagged then 456, 789 tagged.I can do this easily with my Summit switches, but I can't seem to crac...

T_Pitch by New Contributor III
  • 209 Views
  • 3 replies
  • 0 kudos

X450G2 - Intrusion Reaction

Hello community,i am far from intermediate regarding Exos and i am searching for a way to block unknown devices with a little app i am currently writing for our office:This app identifies machines that are not known in the networkIf a machine is not ...

SaschaE by New Contributor
  • 110 Views
  • 1 replies
  • 0 kudos

Extreme 5420 mibs temperature sensors ?

Hi,I have walked the switch and this is the output for the following mibs:1.3.6.1.4.1.2272.1.101.1.1.2.1.2 rcVossSystemTemperatureSensorDescription LEAF DisplayString:08/09/2022 11:03:10 (24 ms) : Walk 1.3.6.1.4.1.2272.1.101.1.1.2.1.208/09/2022 11:03...

GavinB by New Contributor
  • 149 Views
  • 0 replies
  • 0 kudos

Managing QoS for voice traffic

I've put this in the general switching and routing section because I'm dealing with EOS, EXOS and VOSS. I want to apply QOS to voice packets. For our sins we use CUCM, but some users (whose phones are connected to an X440-G2) are hearing brief audio ...

James_A by Contributor III
  • 197 Views
  • 1 replies
  • 0 kudos

vsp - ers

Dear all , I have 2 core switches in the stack (VSP-8404C) and all edge switch are connected directly to the core switch. edge switches models are  (3650GTS-PWR+  , 3626GTS-PWR+ etc) everything is working when we off the core 2 , even if both switche...

IsrarA by New Contributor
  • 251 Views
  • 2 replies
  • 0 kudos