ExtremeSwitching (VSP/Fabric Engine) - Page 30 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Resolved! NNI as a DCI - Best practice

Does Extreme have any best practices for DCI links configured as NNI's for a pair of 8404's?These NNI's will be be connecting BCB's, So at this point of time they are strictly just transit nodes and are not doing any L3 features for the network, VRRP...

BCB VS BEB

Can a BCB have UNI ports and still work as a BCB?

Unable to connect to CLI in read-only mode via Radius

Hi,I'm facing an obvious problem trying to allow CLI RO connection to FabricEngine devices using Radius on XIQ-SE.All is working fine for RWA access, and my setup is similar for RO access, except for Access control profile on XIQ-SE, for which policy...

Soft loopback for RFC 2544

New to the Extreme VSP world and I have been researching to see if it is possible to create a soft loopback on a VSP7400 for a specific i-sid to so we can run an RFC 2544 benchmark test across our fabric without having a physical endpoint on the othe...

SMLT Square - Force traffic down VLAN UNI instead of SPB (NNI) links

We are testing multiple p2p circuits between DC's for the sake of the test we have created VID 50 and placed an IP on these vlans to ping across this circuit for connectivity.The current DC has prod traffic that is being sent down existing NNI's 2/19...

Top Kudoed Authors

User

Count

29

15

14

11

5

GTM-P2G8KFN