ExtremeSwitching (VSP/Fabric Engine) - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

40GbE backbone - is this possible using the VSP 8404C chassis?

Hello Community,I have a pair of the VSP 8404C chassis currently linked at 10GbE I believe. I have managed to get hold of 2 x 8418XSQ 16-port 10 Gigabit Ethernet SFP+ and 2-port 40 Gigabit Ethernet QSFP+ Combo ESM cards and have a free slot in each ...

Changing next-hop for a single IP

Hi all.We have a pair of hosts in the same VLAN whose traffic need to be directed to a next-hop different of that in the default route configured in the VSP. As we searched in the forum and diverse documentation it seems that this is only feasible u...

Resolved! Restrict management access to VOSS switches using a firewall

I'd like to restrict access for management to VOSS switches using a firewall. The firewall rules will not be an issue. I'm running VOSS 8.10.x on all VOSS switches. So they have management CLIP addresses, which are separate from Source IP, and loopba...

Firmwire update of 5320-48p-8xe

We have 5320 Series switch which has 9.0.4 Fabric Engine. Want to update the firmwire to 9.2.1.1 . Size of the file is roughly 114MB. So, when I try to load the software in my intflash, prompt told me not enough space. I cleared my core dumps and cle...

Resolved! Extreme Fabric – Installation and Configuration (On-Demand) lab

Hi everyone,Has anyone completed the Extreme Fabric – Installation and Configuration (On-Demand) lab?I’m unable to execute any of the CLI commands listed in the lab guide—the switch doesn’t respond. Also, the login details provided in the guide are n...

Top Kudoed Authors

User

Count

40

25

22

18

10

GTM-P2G8KFN