ExtremeWireless (General) - Page 56 - Extreme Networks

ExtremeWireless (General)

Questions and discussions about wireless in general

Forum Posts

Sorted by:

Start a conversation

Editing "Message Strings" in NAC - unable to apply changes

Hello, everybody, I try to customize NAC captive portal and edit Message Strings I change values and see, that these values are changed in the table. But exclamation sign does not appear in NAC console, so there is nothing to enforce. And because o...

WLAN Site configuration does not allow access to guest portal

Our WLAN deployment consists of a main Location with the WLAN Controller as a virtual machine. We have three branch factories connected via symmetrical WAN lines. We use machine certificates and authenticate against RADIUS (NPS). This Szenario is run...

Unable to login to HiPath Wireless Controller - Error "User is not in valid user groups"

The HiPath wireless controller (C2400 Enterprise running v7.3.1) was configured for Local and RADIUS authentication for the Management Interface (under the "Login Management" menu). I was only able to login with my RADIUS credentials, and wanted to r...

Mac Authentication, Dynamic VLANs and Silent Devices

Hi, if dynamic VLAN assignment is used together with MAC authentication, so called silent devices pose a problem. A silent device in this context is any end system that does not regularly send data. This results in both the MAC address and authenti...

Assigning static IPs to Access points

Hi, Can we assign static IP to APs throught its CLI? What is the default username/password for AP? User guide/Maint guide instructs to assign static IP only after AP connects to controller. But we need to assign IP address and controller address man...

Top Kudoed Authors

User

Count

12

8

6

5

5

GTM-P2G8KFN