cancel
Showing results for 
Search instead for 
Did you mean: 

10.41.10 - dashboard, low link speed shows wrong value

10.41.10 - dashboard, low link speed shows wrong value

Ronald_Dvorak
Honored Contributor
Hi,

I've just upgraded a customer controller from 10.41.05 to 10.41.10 and now the dashboard show 213 APs with low link speed = all APs.

I've checked one switch with about 10 APs and the "show port no" result is that all the AP ports are actual speed/duplex of 1000/full.

Tried a reboot of 10 APs but no change.
If you click on the low link speed counter the pop-up list only 3 APs - not sure whether that is the max that is shown in this window.

I'd see the same result on my lab controller - even there are only 8 out of 12 with low link speed - I know that is also not correct.

Is that a known issue !?

-Ron
6 REPLIES 6

Ronald_Dvorak
Honored Contributor
Any ETA on the release date for 10.41.11 ?

Thanks,
Ron

Thanks Gareth

Ron

Provisional release date is 14/11/18, although this maybe subject to change.

-Gareth

Craig_Guilmette
Extreme Employee
https://gtacknowledge.extremenetworks.com/articles/Solution/10-41-10-code-clicking-low-link-speed-li...

This doc needs to be altered to list low link when there really isn't as well but at 1 time we thought it was 2 different problems and wrote 2 docs.
GTM-P2G8KFN