ExtremeWireless (Identifi) - Page 160 - Extreme Networks

ExtremeWireless (Identifi)

Questions and discussions about Identifi devices

Forum Posts

Sorted by:

Start a conversation

WS-C4110 compatibility with AS-AP3610 ?

Hi, We have an installation in a customer's site with more than 100 AS-AP3610 and two WS-C4110 and they don't have the economic capability to renew it but they still need to maintain it until it is completely EoL, so as an alternative for the suppo...

After EWC fresh install v9.21 and upgrade to v 10.01.01.0129 ap 3801i not detecting.

After EWC fresh install v9.21 and upgrade to v 10.01.01.0129 ap 3801i not detecting. AP 3801i used to be connected to dead/bricked controller. SSH'ed into AP and reset to factory. AP getting IP from DHCP - SSH'ed onto AP and I can ping controlle...

AP license migration from WLAN Controller 4110 to v2110

Hello, is it possible to migrate the Capacity Upgrade "WS-CTLCAPUP25" from WLAN Controller 4110 to Controller V2110 ? best regards peter

C25 failover mode, AP's stay on non-failed controller even after the failed controller came back up.

Hi, I'm using 2 C25 controllers in fast failover mode. Now I had to reboot one of the controllers, but it seems the other one doesn't seem to recognize that the failed one is back operational and all the AP's are now are now active on one controll...

maximum recommended clients per access point

Hello there, We noticed client disconnections in our WLAN network. The clients are connected in the 2.4Ghz band with the access point AP3805i (radio 2). I've seen, that there are 80 clients connected with this radio. So, what is the maximum recommen...

Top Kudoed Authors

User

Count

20

11

10

8

5

GTM-P2G8KFN