What is the Difference between tag and untag in topology creation..... Say suppose 6 topologies ( Bridge @ AP) with different vlans are created on same interface and that interface also has mgmt IP on it and will be the only interface used connected to lan(switch)...... will all 6 topolies be created as tagged or untagged.......
You should be able to use the management IP as untagged and the create the other topologies as tagged using whichever vlans you need, assuming those vlans are tagged on the switch port that the controller is connecting to.
OK got it.......Then how to achieve the above situation.... One interface only will be used on controller connecting to core switch. I need to create 6 B@AP topologies.... and I should be able to manage the controller through network with an IP address.....
