cancel
Showing results for 
Search instead for 
Did you mean: 

NAC / XMC as Radius - not passing 802.1x authentication

NAC / XMC as Radius - not passing 802.1x authentication

PGCourtois
New Contributor

Hi Team,

I have Extreme Management Center (XMC), Extreme NAC and Extreme Wireless (V2110) configured in my environment.  XMC is acting as a Radius and it is successfully authenticating users.  My issue is with configuring 802.1x (PEAP) authentication on an SSID.  I configure 802.1x and set the Radius server options.  When I test the Authentication server within the wireless controller I get the following error:

 

904a69acd92842d996fa55dcbbcfbeaa_4419cb07-8704-4250-96c6-694a30df809a.jpg

Not sure where to go from here.  Thanks.  - Paul

8 REPLIES 8

PGCourtois
New Contributor

@StephanH  - Thank you for the input.  I’ll go over the guides and update as I progress.  I also have a case in with Extreme Support.  I will provide a solution once reached. 

PGCourtois
New Contributor

Thanks to everyone for the input.  I see no authentications in the “End-Systems”.  I have a system that I try to access the 802.1x configured SSID.  It prompts me for a password or “Connect using a certificate”.  Windows auth doesn’t pass me through and I don’t have a Cert configured.  Also, the AP’s have a PEAP configuration.  Do I configure both the SSID and AP?

*Note: I am a wireless newby.  My terminology/verbiage may not be correct.  I appreciate your patience with me on this. 

Miguel-Angel_RO
Valued Contributor II

And as mentioned by @Leo1 and @StephanH a reject on a 802.1x SSID is normal.

Here from the doc:

902699c89e804379b534aac16a93782b_9bc3bc90-f057-4e8b-8b47-87f79a147d2f.png

Mig

GTM-P2G8KFN