cancel
Showing results for 
Search instead for 
Did you mean: 

Wireless Controller seems not tag vlans

Wireless Controller seems not tag vlans

David1
New Contributor
Hello

we want to use vlan tagging via wireless controller. The Management vlan should be untagged and the Client should be tagged.

the ExtremeWireless (IdentiFi) has the option to tag vlans. But all traffic falls into the untagged (native). An Extreme access point is connected to a Cisco Switch. Is there a Special configuration nessesary for the Cisco Switch to build a trunk to the access point?

Thanks for any help.

Greetings

5 REPLIES 5

David1
New Contributor
@Hyde: This configuration is done for the Client traffic. The Management port for the access point should be in another vlan. The port on the Cisco Switch is configured as trunk with the client vlan id as trunk vlan and the Management vlan as native vlan (untagged). Is this correct?

Doug
Extreme Employee
Correct.
Doug Hyde
Director, Technical Support / Extreme Networks

Doug
Extreme Employee
The B@AP topologies for users just need to be tagged, the port the ap is plugged in to should be tagged as well for the same VLAN ID.
Doug Hyde
Director, Technical Support / Extreme Networks

Doug
Extreme Employee

eb396dc538424ba08d6a15118906bb9e_RackMultipart20170809-56800-x3ihtu-BatAP_inline.jpg


Doug Hyde
Director, Technical Support / Extreme Networks
GTM-P2G8KFN