cancel
Showing results for 
Search instead for 
Did you mean: 

AP5010 Standalone Mode

AP5010 Standalone Mode

oxoyoz
New Contributor III

Will this AP work in standalone mode with the newly release 7.9.0.0 Wing firmware? 

Also it seems the flash UI is no longer included so configuration can only be done through CLI? 

Thanks. 

1 ACCEPTED SOLUTION

Christopher_Fra
Extreme Employee

Hello oxoyoz,

       The AP5010 running WiNG v7.9.0.0 requires a wireless controller (e.g. VX9000, NX55xx, NX75xx) for adoption. The AP5010 does not support WiNG Stand-Alone mode. If using a WiNG Controller, UI is supported. The other option would be to use ExtremeCloud IQ (XIQ). 

Thanks,

Chris Frazee

View solution in original post

2 REPLIES 2

Christopher_Fra
Extreme Employee

Hello oxoyoz,

       The AP5010 running WiNG v7.9.0.0 requires a wireless controller (e.g. VX9000, NX55xx, NX75xx) for adoption. The AP5010 does not support WiNG Stand-Alone mode. If using a WiNG Controller, UI is supported. The other option would be to use ExtremeCloud IQ (XIQ). 

Thanks,

Chris Frazee

Does this ap only work with Extreme Networks brand controllers? Also if I use XIQ can i connect to a random router and get Ip address? Thanks

GTM-P2G8KFN