AP as Virtual Controller - does it support client connections?
When you have an Access Point set up as a Virtual Controller. Is that AP dedicated to only that function or will it also support client associations/connections?
Forum Posts
static nat on dhcp interface
Hi, how do i configure a static outside nat on a dhcp interface like 'ip nat outside destination static 123.123.123.8 2222 tcp 10.10.10.10 22' The ip 123.123.123.8 needs to be replaced with the dhcp adress. I am using wing 5.8.6. Thx for your he...
DTIM
Hello community, I have a generic question about DTIM settings. As far as I know the DTIM is starts only when we have at least one power save client. In standalone deployment it's very clear. But in case of vc deployment with several adopted aps DTI...
nsight vs e-guest
Hi everyoneI have 3 doubts in which I needed you to help me -I have a vx9000 installed with Nsight. Could I export the Nsight database to be treated by third-party software? Would it be exported from here? -And on the other hand, I'm looking to r...
No traffic from AP to different VLANs (opposite site works)
Hello, I've got a brand new APs with WiNG v 5.9 and in this case I'm using Enterprise UI and CLI to communicate with them. I'm struggling with setting up a Radius authentication on a specific SSID and after some time I think I've finally discovered ...
