Copying RFS-7000 configuration to another RFS-7000

[Srinivas_K1]

We have 2 no's of RFS-7000 controller which is running the firmware version of wing4 . So, we are trying push the one of RFS-7000 controller configuration to another RFS-7000 controller(which was configured with different configuration) if we apply the configuration the running config will be overrides or will be having the configuration of what we are trying to push.

Kindly let us know how does it work

[Daren_Ellis · Accepted solution]

Hi,

You can check the WiNG 4.x reference guide
Link to reference guide found on google search:

Please note:
WiNG 4.x software and Hardware model RFS7000 is EOL.

Would suggest speaking with Partner or Extreme rep about hardware refresh.
Or at least upgrading to 5.x code. the config will need to be redone from scratch.

• Last firmware available for RFS7010 5.8.5.x
• Last firmware version of controller that supports AP300 -- 5.5.6
• Last firmware version of controller that supports AP650 & AP7131-- 5.8.5.x
• AP5131 not supported in WiNG 5.x