cancel
Showing results for 
Search instead for 
Did you mean: 

How to adopt standlone AP 7502 to wing controller vx9000

How to adopt standlone AP 7502 to wing controller vx9000

Niyas
New Contributor III
Hi,
we have extreme AP 7502 and controller VX9000. we need to adopt AP 7502 to vx9000.we are working on the local/standalone platform.
17 REPLIES 17

Christoph_S
Extreme Employee
1 - VX and AAP licenses should be valid on the controller
2 - If applying the VX license using this command : #license VX and getting an error then the key might have been created when the VX had a different IP address. When the IP address on the VX controller is modified, the serial number changes and this disables all licenses. If this is the case, recreate the license/s using new serial number. Type VX in upper case when running the licensing command.
3 - Make sure the AP can ICMP and Mint ping the controller and vice versa
4 - Make sure ports 24576 and 24577 are not blocked

If above are successful proceed with one of these adoption methods: https://gtacknowledge.extremenetworks.com/articles/Solution/CLI-command-for-layer-3-adoption-of-acce...
Christoph S.

Yas
New Contributor
Niyas
You have to be sure about your VX9000 applicance license. did you check your VX9000 Serial number ( sh version) ??

Niyas
New Contributor III
Hi Robert,

I have license key,but when i try to configure license key showing error-Feature name and license key mismatch.

RobertZ
Extreme Employee
Please call GTAC, we will help you resolve this. Have your voucher# and output of the CLI command 'show ver' from the VX9000 when you call in.
GTM-P2G8KFN