cancel
Showing results for 
Search instead for 
Did you mean: 

Loop reboot ap4022, and strange log on it

vladimiratm
New Contributor
One of ap4022 reboots every 15-20 minutes. When she is booting, i try to connect via SSH or from controller. When i login, i see message:
code:
Unable to connect to configuration-manager, executing diagnostic shell


Log on problem AP looks strange:
Nov 28 15:14:16 2018: %DAEMON-1-ALERT: init: process '/etc/init.d/cfgd start' (pid 1346) exited. Scheduling for restart.
Nov 28 15:14:12 2018: %KERN-2-CRIT: Checked all inodes but still 0x534 bytes of unchecked space?.
Nov 28 15:14:01 2018: %AUTHPRIV-4-WARNING: ipsec_starter[1693]: charon (1696) started after 60 ms
Nov 28 15:14:00 2018: %AUTHPRIV-4-WARNING: pluto[1694]: loading secrets from "/var/etc/ipsec.secrets"
Nov 28 15:14:00 2018: %AUTHPRIV-4-WARNING: pluto[1694]: adding interface lo/lo 127.0.0.1:4500
Nov 28 15:14:00 2018: %AUTHPRIV-4-WARNING: pluto[1694]: adding interface lo/lo 127.0.0.1:500
Nov 28 15:14:00 2018: %AUTHPRIV-4-WARNING: pluto[1694]: adding interface pkt0/pkt0 127.0.1.1:4500
Nov 28 15:14:00 2018: %AUTHPRIV-4-WARNING: pluto[1694]: adding interface pkt0/pkt0 127.0.1.1:500
Nov 28 15:14:00 2018: %AUTHPRIV-4-WARNING: pluto[1694]: adding interface vlan1/vlan1 169.254.37.12:4500
Nov 28 15:14:00 2018: %AUTHPRIV-4-WARNING: pluto[1694]: adding interface vlan1/vlan1 169.254.37.12:500
Nov 28 15:14:00 2018: %AUTHPRIV-4-WARNING: pluto[1694]: adding interface vlan1/vlan1 10.12.14.36:4500
Nov 28 15:14:00 2018: %AUTHPRIV-4-WARNING: pluto[1694]: adding interface vlan1/vlan1 10.12.14.36:500
Nov 28 15:14:00 2018: %AUTHPRIV-4-WARNING: pluto[1694]: listening for IKE messages
Nov 28 15:14:00 2018: %AUTHPRIV-4-WARNING: pluto[1694]: Changing to directory '/var/etc/ipsec.d/crls'
Nov 28 15:14:00 2018: %AUTHPRIV-4-WARNING: ipsec_starter[1693]: pluto (1694) started after 20 ms
Nov 28 15:14:00 2018: %AUTHPRIV-4-WARNING: pluto[1694]: including NAT-Traversal patch (Version 0.6c)
Nov 28 15:14:00 2018: %AUTHPRIV-4-WARNING: ipsec_starter[1688]: Starting strongSwan 4.5.0 IPsec [starter]...
Nov 28 15:13:58 2018: ap4022-86250C : %MESH-4-MESHPOINT_LOOP_PREVENT_OFF: Meshpoint loop prevention off (port ALL), all wired traffic is allowed
Nov 28 15:13:56 2018: %AUTHPRIV-4-WARNING: ipsec_starter[1308]: ipsec starter stopped
Nov 28 15:13:56 2018: %AUTHPRIV-4-WARNING: ipsec_starter[1308]: charon stopped after 200 ms
Nov 28 15:13:56 2018: %AUTHPRIV-4-WARNING: ipsec_starter[1308]: pluto stopped after 40 ms
Nov 28 15:13:56 2018: %AUTHPRIV-4-WARNING: pluto[1309]: shutting down
Nov 28 15:13:55 2018: %AUTHPRIV-4-WARNING: ipsec_starter[1308]: UPDATE handled, decremented UPDATE refcnt to 0
Nov 28 15:13:55 2018: %AUTHPRIV-4-WARNING: ipsec_starter[1308]: UPDATE queued for processing refcnt 1
Nov 28 15:13:55 2018: %AUTHPRIV-4-WARNING: ipsec_starter[1308]: SIGHUP received, incremented UPDATE refcnt to 1
Nov 28 15:13:55 2018: %AUTHPRIV-4-WARNING: pluto[1309]: loading secrets from "/var/etc/ipsec.secrets"
Nov 28 15:13:44 2018: %KERN-2-CRIT: Checked all inodes but still 0x534 bytes of unchecked space?.
Nov 28 15:13:03 2018: %KERN-2-CRIT: Checked all inodes but still 0x534 bytes of unchecked space?.
0 REPLIES 0