cancel
Showing results for 
Search instead for 
Did you mean: 

Wing | AP510i-1-WR not adopted by VX9000 controller

Wing | AP510i-1-WR not adopted by VX9000 controller

AdrianB
New Contributor II
Hi Guys

Our VX9000 controller do not adopt the AP510i-1-WR, would you please help us with any advice/idea?

Single difference that I found is the firmware where the AP510i-1-WR is having 7.7.1.0-005R and VX9000 is having 7.7.0.0-018R.
On this VX9000 we have other APs (AP410 / AP360 / AP7522 / AP7532) adopted but as I told you above the AP510i-1-WR is not adopted even if I can ping from both sides the destination and from VX the mint is visible.

For further informations please reply to the post with what you need.
3 REPLIES 3

Christopher_Fra
Extreme Employee
Hello Adrian,
       Wing support for the APxxx-1 (including AP510i-1-WR) started in v7.7.1.0-012R. You will need to upgrade the VX9000 to v7.7.1.0, at a minimum, in order to support the AP510i-1-WR. I strongly advise to upgrade to the latest v7.7.1.2-007R, which is the latest and greatest and has been very stable. 

Please review the v7.7.1.0 release notes, which detail the above. 

Thanks,
Chris Frazee

Hello guys

Thank you for the tip. It worked as you said. The topic can be closed.

RobertZ
Extreme Employee
I would start with making sure both are on the same firmware version. Share output of CLI command " show adoption status" and " show mint neighbors" 

What does "adoption status version-mismatch" mean?




GTM-P2G8KFN