What is the "normal" memory usage for an AP4000? Approximately 5-10 users, light usage. Seeing 40% memory usage on APs, only about 7% cpu usage. To me this seems fine, but wanted to check with others...
When accessing any of my 37 switches the overview does not show any data. I have tried to enable and disable iqagent by cli. We have even removed the switch and re-added it. But no data comes up. Whe...
We have a Guest Network that we would like available in specific rooms all day long, but in other areas only during certain hours. I know I can create a schedule for an SSID, but it affects the...
I am getting a stale record of the device was found in the redirector. Can I get some help with fixing this issue? I was reading others posts and it seemed to me that support could help fix...
I encountered this issue when I browsed MAC objects. I referred at Solution: An unknown error has occurred on XIQ | Extreme Portal (site.com) but there is no workaround at this time. &nbs...
Hello! I've been trying for 2 weeks now to enable SNMP on our APs to have it on our Zabbix appliance, but no luck at the moment. I've enabled SNMP on the interfaces, on the policy, and on the traff...