Hello, I'm trying to disable weak SSH ciphers on couple of switches which are already enrolled in XIQ-SE. Switches are running FW 9.0.0.0. I've tried to do it by uploading a file with CLI commands ...
Hello, First post here, but long time reader! I just purchased used 7254 XSQ unit, and looks like all the software was removed from the unit. Any ideas of how to find a software for th...
Hello, We are using 5520 switch running voss. It is acting as L2 switch and connected to firewalls. There are couple of L2 vlans configured on it. To manage those switches, I have configured mgmt CL...
I need to set up a network as shown in the diagram. Core is the Voss system, Access is the Exos system, and my core layer uses SPBM and VRRP technology for redundancy. The core and access are interco...
Hi Team, I want to share my first dhcp-server config lab on VOSS: 1.- Mandatory, mgmt CLIP interface: mgmt clip ip address 1.1.1.1/32 enable 2.- Create VLAN, L3 interface and assing it to a por...
Hello, I have an ERS 4950 (Ports 1/49-50) connected to a VSP-7254 VOSS Switch (Ports Gig1/17-1/18) using fabric attach. Everything works fine but I was just wondering if this is correct as on t...
Hello All, I've had a look at the various Extreme documents regarding LACP on a LAG etc. I can't seem to make this work for some reason. What I have is 2x 8404C 10GB core switches and I wish ...
Hi, I am going to be setting up fabric extend using a pair of XA1480s. The headend switch will be in a data center behind a firewall. The other, at a remote location plugged directly into...
Hi all My goal is to bring internet acces directly to a VM with L2-VSN I make a rule in xmc to set vlan/i-sid (MAC auth) for the provider box and my test computer. ERS where is plugged my box give...
I would like to know if there is a way to clear the terminal screen without closing the terminal on VOSS OS, (VSP-7400 series). I don't like when I am testing that the screen gets full of commands, ...