Hello, I have 2 Wireless Lan. Corporate and visitors. I need to block access to my server network when access is made on the guest LAN. Ex: lan 192.168.4.0/24 I created the rules and applied them ...
Hi, Is there any command to change the personality of Universal AP from HiveOS to WiNG without on boarding to XIQ?? How to exit from service personnel mode if AP305C booted in to? As this AP ...
hello) I have 200 ap310i access points and a stack of 2x vx9000. Initially, the access points and the controller were located in different vlans , and fortigate was responsible for routes between th...
Hello, Do I need to allow or change any settings in the wireless infrastructure to allow wifi calling? I have that enabled on my android phone(as well as other users) but when i disable...
Today Morning, I have tried to login the Extreme Wing Manager (1.0.9) but I can’t able to open it, and I am getting the error of Adobe Flash player support. I have attached the snapshot below for yo...
Hello there, We are having problems with VX. We tried to restart the service, to change cluster priority between both VX. Even the client checked his VMWare if there was an issue on it, but it shows...
Hello everyone! AP not into in controller vx9000 AP model: ap7532 Problem: Vx9000#show adoption log adopter 2024-01-03 21:31:15:Sending MLCP Offer to 75.03.18.C0 (link_level=2, prefe...
AC : NX7500 version 7.5.1.6-001R 1. The APs emitted several signals, including the W1 signal(802.1X authentication). Yesterday, the terminals connected to the W1 signal was disconnected at 17:00 and...
I have three AP6521 (1 controller+ 2 adopted AP`s). After upgrade from Wing 5.4 to 5.6 wireless speed down to 80-100 mbps. Before upgrade speeds was 200-280 mbps. AP's works in 5Ghz mode.
Hi, I know that the RFS4000 controllers are very old, but we still have some locations where we use it. We have two RFS4000 controller in an Cluster running up more that 5 years. A few days before ...