When using flow redirect do I still need a default route or will that interfere with flow redirect? Should I have create flow-redirect BACKUP-INET configure flow-redirect BACKUP-INET add nexthop 1...
I have a 5520 which I am trying to log into via SSH key based authentication. I followed the user manuals instructions and configured it correctly for version 31.2.1.1, however when I upgraded the bo...
Hello everyone, i was able to get an old Extreme Summit x250e-48p of my business as its outdated, and not needed. show version Switch : Rev 6.0 BootROM: 1.0.5.7 IMG: 12.1.1.4 Image : Ext...
Up to now I've only dealt with SFP & SFP+ ports and I'm not familiar with QSFP yet. So a few questions. If connecting a QSFP port to a 10 Gb device with a breakout cable, can a lane be bonded w...
Hello, we had some problems with the upgrade to 32.6.1.5-patch1-2 over the weekend. I wanted to ask if this is the case for you too. When we updated the X690 the 40G ports no longer came up. They w...
...uthentications that can continue: publickey,password
debug1: Next authentication method: publickey
debug1: get_agent_identities: bound agent to hostkey
debug1: get_agent_identities: agent returned 3 keys
debug1: S...
Hello, bear with me im kinda new to most of this, I have a problem trying to update my 5320 switches and utilize 10gb SFP ports now that we dont have to pay for them. I have all my ports the...
Hi, I am trying to stack my 5520 series switch, using QSFP+ to SFP+ adapter.But switch is not detecting neighbour device and also tried to use the stack port as a normal ethernet port in ...
We currently both connections from our ISP connected to one X460-48t switch (16.2.5.4 16.2.5.4-patch1-30) Ports are set to auto-negotiate. enable sharing 51 grouping 51-52 algorithm address-based L...