Hi, I've got a Fabric engine where I use the NAC to assign the VLANs, and I've configured DHCP-Relay for dynamic ip address assignment for both L2VSN and L3VSN. In L2VSN all works well and the clien...
Hello, I'm trying to disable weak SSH ciphers on couple of switches which are already enrolled in XIQ-SE. Switches are running FW 9.0.0.0. I've tried to do it by uploading a file with CLI commands ...
Hello All, I've had a look at the various Extreme documents regarding LACP on a LAG etc. I can't seem to make this work for some reason. What I have is 2x 8404C 10GB core switches and I wish ...
I need to set up a network as shown in the diagram. Core is the Voss system, Access is the Exos system, and my core layer uses SPBM and VRRP technology for redundancy. The core and access are interco...
Hi All, I was wondering if there are plans for implementing VOSS SPMB capabilities in EXOS, so the EXOS switches can work as BCBs/BEBs. VOSS has quite complicated command line interface compared to...
Hi Community, I would greatly appreciate it if you could provide guidance on how we can configure our switches to automatically save their configurations at regular intervals. Additionally, if there...
Hi I'm using 5420 with Fabric Engine an i need to mirror ports to an isid. I've been trying to setup this with several Fabric Engine releases (9.0.2 / 8.10.3 / 8.8 or 8.6) with no success: if the...
Hello, We are using 5520 switch running voss. It is acting as L2 switch and connected to firewalls. There are couple of L2 vlans configured on it. To manage those switches, I have configured mgmt CL...
Hi team, in rel 9.0 DHCP server was introduced for VOSS: Now Im trying to configure it on 5420 REL 8.10.2.0, but I cant find the "ip dhcp-server" commads. Im confused, What do i need ...
...ith flex-uni config, but I still got "Churn" error in logs and MLT was in NORM, not SMLT mode. Then I've found an article saying that EXSi supports LACP only with vDS virtual switches, which is not true...