cancel
Showing results for 
Search instead for 
Did you mean: 

how reset ap-7612?

how reset ap-7612?

WallyGBR83
New Contributor

Hello all,

I bought online a used ap-7612 but nor me nor the seller know how it was configured.

when connected to my lan seems that is not configured to take an ip from dhcp.

how can i discover if and which ip was configured statically?

or, better, how can i reset it to factory defaults?

 

thanks

1 ACCEPTED SOLUTION

Tomasz
Valued Contributor II

Hi Wally,

 

Could you please try creating a loopback plug with short-wired pin 1+3 and pin 2+6, plug it into GE2 and boot the AP?

https://extremeportal.force.com/ExtrArticleDetail?an=000080352

That’s actually surprising to me:https://extremeportal.force.com/ExtrArticleDetail?an=000090870

 

Hope that helps,

Tomasz

View solution in original post

7 REPLIES 7

WallyGBR83
New Contributor

is it with 3.3V logic ?

Tomasz
Valued Contributor II

Hi Wally,

 

Glad to hear!

Regarding TTL, frankly speaking I cannot find any mention of this interface in hardware docs for 7612. I’d assume WiNG default console settings, ie. Putty default + 115200 baudrate.

 

Hope that helps,

Tomasz

WallyGBR83
New Contributor

Loopback plug works! thanks a lot!

about TTL interface ( now not urgent 🙂 )  do you know which is the correct config?

i mean baudrate, flow control, stop bits and parity

Tomasz
Valued Contributor II

Hi Wally,

 

Could you please try creating a loopback plug with short-wired pin 1+3 and pin 2+6, plug it into GE2 and boot the AP?

https://extremeportal.force.com/ExtrArticleDetail?an=000080352

That’s actually surprising to me:https://extremeportal.force.com/ExtrArticleDetail?an=000090870

 

Hope that helps,

Tomasz

GTM-P2G8KFN