we have summit x460-24t extreme networks switch . I want to trunk port to send and receive double tagged ports and allocate IP addresses via DHCP . example : -say outer vlan (service vlan) is x and inner vlan (customer vlan) is y . Then it should all...
Hi. I installed a switch C5 C5K125-48 firmware version 06.81.07.0004, the manual and datasheet for this switch say that have feature PoE, but when I consulted the answer is: - SW_C5_TEEREOB(su)->show inlinepower Detection Mode:auto Unit Status ...
Hi all, I'm having a really wierd situation on GNS3. I have 2 EXOS switches on the project, the problem is that interfaces aren't static. If i connect both switches using interface1, it seem to be interface5 if you see the show ports command on the ...
Hi everyone. I am just wondering what people think about the use of VLANs in a 100% Extreme network (B5 for wired and 5210 wireless)? I've heard things like VLANs are "old school" and there are better ways of doing things now with policy, NetSight,...
hello Dears, could you please give support to my for this task .I have eXtreme switch type Summit X450-24x DC in my network. i want to know how I can make one port Master and another one port a slave , it will working automatically when the master g...
