ExtremeXOS 22.5.1 is now available!

[Drew_C]

Hello community,
We are pleased to announce the availability of the EXOS 22.5.1 release. Several significant features/capabilities have been made available in this release, including:

• Extreme Extended Edge Switching (p14) and ExtremeSwitching V400 Support (p15)
• BGP Auto-Peering (p17)
• Virtual Extensible LAN (VXLAN) Tunneling Improvements (aka RIOT Support) (p12)

The release also includes a number of service and customer feature enhancements.

Customer-Related Enhancements

• RSTP over MLAG (p9) Rapid Spanning Tree Protocol (RSTP) can now be configured on MLAG peers (as well as connected access switches) to help prevent loops within an MLAG topology
• ALPM mask improvements (p10) Enhanced IPv6 route support when using mask lengths between 64 and 128
• BOOTP Relay over L3VPN (p9) BOOTP Relay can now be enabled over VRFs and VPN-VRFs
• CDP Voice VLAN tag in every packet (p9) Cisco Discovery Protocol (CDP) Voice VLAN tags are now enabled by default for all CDP packets

Service Related Enhancements

• Zero-Touch Provisioning over Tagged VLANs (p10) Previously, ZTP and ZTP+ could only operate over untagged VLANs
• Stacking enhancements (p11) Improvements in stack operation when applying license upgrades
• sFlow extensions (p14) New data structures to support reporting on hardware/table utilization statistics
• Comparing configurations (p20) You can now view differences between switch configuration files, including the differences to a running configuration file

For more information on these as well as all the other new features in EXOS 22.5.1, please refer to the EXOS Software Release Notes.

Availability and Platform Support
EXOS 22.5.1 was released on May 29, 2018 and is supported on the following switching platforms:

• X440-G2 Series
• X450-G2 Series
• X460-G2 Series
• X620 Series
• X670-G2 Series
• X690 Series
• X770 Series
• X870 Series

Additional Helpful Resources
ExtremeXOS® 22.5 Software Images & Documentation

EXOS Software Images
Available for partners and customers on the Extreme Portal:

• summitX-22.5.1.7.xos (login required)
• onie-22.5.1.7.xos (login required)

EXOS Documentation
ExtremeXOS 22.5 User Guide:
https://documentation.extremenetworks.com/exos_22.5/EXOS_User_Guide_22_5.pdf

ExtremeXOS 22.5 Command Reference Guide:
https://documentation.extremenetworks.com/exos_commands_22.5/EXOS_Command_Reference_22_5.pdf

ExtremeXOS Feature License Requirements:
https://documentation.extremenetworks.com/FLR_22.5/ExtremeXOS_22.5_Feature_License_Requirements.pdf

ExtremeXOS 22.5.1 Release Notes:
https://documentation.extremenetworks.com/release_notes/ExtremeXOS/22.5/ExtremeXOS_22.5_RelNotes.pdf

[PeterK]

STP via MLAG is good, but not good implemented.In XOS 22.1? MSTP was implemented for easier STP configuration, without need of untagged vlan on STP-enabled port...If you wan't to use STP and MLAG you need to go back to to RSTP and need to configure a untagged vlan on interswitch-links... I don't understand, why going this way...

[Drew_C]

ExtremeXOS 22.6.1 is now available!

[Drew_C]

The day I was going to post the 22.6 announcement is the day our community host was having problems. I'll see if I can get it posted today.

[James_A]

Well, they added MSTP over MLAG in 22.6.

Is there any reason 22.5 got an announcement post but 22.6 didn't?