ExtremeCloud A3
Questions and discussions about ExtremeCloud A3
45 PostsActivity in Network Management & Authentication
Firmware Upgrade gets stuck from site engine
I have tried to upgrade the firmware from Site Engine, but it takes too much time and gets stuck. I tried three times usually how much time it will take to complete the installation. suggest some tips
how to configure Extremecontrol for switch management access on voss
HelloIm working on a setup to configure ExtemeControl as radiusserver for CLI managment login in VOSS switchesThe Set up EXOs switches is working , To configure this i use document: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000081977&...
AP4020 serial not supported when onboarding on XIQ
Hello,I've been trying to onboard an AP4020 on my XIQ (Connect) but when I type in the serial number (and yes, I verified that it is correct ) I get "At least one of the specified serial numbers is not supported" and I can't go on with the onboarding...
Access dashboard and alarm page without login
Dear all.It is about XIQ-SE.I have a screen here that rotates and displays different system statuses using Microsoft Edge kiosk-mode.Is there a way to access the "Alarms & Events" or a Dashboard/Report page without login?https://homersimpson:8443/On...
Resolved! Asset Inventory (preferably using XIQ) including members of stacks
Hi all,I'm supposed to come up with an inventory of Extreme switches in our network. I can export the device list in the /world site, but it doesn't have members of my stacks. Example: Stack "MyStack" only shows one entry, making it impossible to tel...
