Data Center (MLX & CER/CES)
Questions and discussions about MLX/CER/CES
57 PostsActivity in Switching & Routing
XIQ Firmware update say : ERROR ... But the switch have received correctly the image : XIQ BUG ?
From the SWITCH X440G2 / X460G2 in stack :03/12/2025 14:48:59.69 <Warn:EPM.Upgrade.State> Slot-2: Upgrade status Send change partition request to EPM peer(s)03/12/2025 14:48:59.49 <Noti:EPM.install_status> Slot-2: User XMCadm: Image installation fini...
MTU issue on SLX border Leaf
Hello team, I have configured MTU 1522 on port-channel 1 , eth 0/25:1, eth 0/27:1 is the part of the Port-channel. Now we are getting below error as severity warning:2025/02/25-11:45:36, [HSL-1039], 381812,, WARNING, ABC-0001, L2MTU: 1522 value wil...
SNMP Error: Failed to open the file /etc/snmp/extr_userinfo.cfg for reading after update to 32.7.2.1
We hade to upgrade from 32.6.2.68 to 32.7.2.19.The Update was working fine and we got no issues.I Notice a Log Message during Boot <Erro:SNMPD.Error> Error: Failed to open the file /etc/snmp/extr_userinfo.cfg for readingDo i have to worry about that ...
Resolved! Do Not Fragment bit in Fabric Engine 'Ping'
HiI want to test MTU between two Fabric Extend endpoints both running 9.0.4 that traverse a third party network where the third party does not always set the path MTU to allow FE (it's usually 1900 end to end).I'm pinging from the tunnel interface on...
duplicate stack mac. Switch engine exos 5320
Hello,My client commonly sets up and reuses switches in stacks. Today we found one stack mac was duplicated in the network, used by two stacks. Our theory is that both stacks where preconfigured, and when moved on site, somebody took a switch from th...
| User | Count |
|---|---|
| 42 | |
| 31 | |
| 29 | |
| 28 | |
| 28 |
