Extreme Networks

Erhan_YILDIZ1 · 10-26-2018

Hello All, interface gigabitethernet 1/1 lacp aggregation enable lacp enable lacp key 10 lacp mode passive interface gigabitethernet 1/2 lacp aggregation enable lacp enable lacp key 10 lacp mode passive I think I done the lacp config, but I need t...

Erhan_YILDIZ1 · 10-12-2018

Define Native Vlan on Voss

Erhan_YILDIZ1 · 07-25-2018

Hello to Everyone, I am trying to do mac authentication via windows radius on Extreme Networks 220 series device. I can find all command in the release or in gtac. But I can not find any command that I can give password for mac authentication. F...

Erhan_YILDIZ1 · 07-12-2015

Hello, I have 3 different WLAN Services. These wlan's are for "Personel" , "Misafir" and "Mobil" 802.1x for "Personel" Mac Authentication for "Mobil" Guest(Captive Portal) for "Misafir" as seen in below. In the radius server which is "KomRadius"...

Erhan_YILDIZ1 · 07-10-2015

The logs are like this. Also, Jul 10 13:41:16 iom1 fabricModuleManager: [13:41:16] QE[0]: status changnge QM_ERROR2 = 0x0000000f: Queue age event(s) occurred on queue 7/0x0007 Jul 10 13:51:17 iom16 fabricModuleManager: [13:51:17] QE[1]: status ...

Erhan_YILDIZ1 · 10-12-2018

Hello Martin, I couldn't test that for now but you are briallant. Thanks, Best Regards

Erhan_YILDIZ1 · 10-12-2018

Hello, I need a cli command to do that. Could not find anything on cli guide about native vlan. Thanks, Best Regards

Erhan_YILDIZ1 · 07-25-2018

If I am not wrong, with you example configuration, I need to set all client mac address to switch. And I got 10 switches so I need to set all mac address to all switch. Thanks, Best Regards

Erhan_YILDIZ1 · 07-25-2018

Hello, Yes I know this , but this is for local authentication. But I have radius, and all client mac address is already there. So, I need to say to switch all mac authentication password is xxxx. Thanks, Best Regards

Erhan_YILDIZ1 · 09-18-2016

Hello, Can we use these antennas WS-AO-2DIPN3 & WS-AO-5DIPN3 also in ws-AP3965e. Thanks, Best Regards

Extreme Networks

User Statistics

User Activity

Tagging Vlan on LACP on VSP8600

How to define Native Vlan to trunk port on voss VSP switches

How to give 200-Series MAB/Mac Authentication Password

802.1x and Mac Authentication for different "WLAN Service" on Controller 5210

Unexpected log in Backbone Matrix X Series

RE: How to define Native Vlan to trunk port on voss VSP switches

RE: How to define Native Vlan to trunk port on voss VSP switches

RE: How to give 200-Series MAB/Mac Authentication Password

RE: How to give 200-Series MAB/Mac Authentication Password

RE: AP3865e - antenna question