The AP410C running WiNG Distributed does not have UI on any of the WiNG v7.x versions. The AP firmware distributions only have LEAN images, which has no UI. You need to configure the AP via the command-line-interface (CLI) if continuing to use WiNG D...
The AP410C, running in WiNG Distributed, does not have UI. In order to configure and run in standalone mode, you will need to configure the AP from the CLI (Command Line Interface). In order to have AP in standalone mode, access the CLI and perform t...
If using smart-rf and APs are adopting to a wireless controller (e.g. VX9000/NX), access the wireless controller CLI (Command Line Interface) via SSH and perform the following:enable [enter]config [enter]smart-rf-policy xxxxx [enter] (x represents sm...
Depending on scale, you can look at the following, regarding On-Prem Controller for the AP460i/e models:E1120/E2120/E2122/E3120/E3125/VE6120/VE6125 (These are Extreme Cloud IQ Controllers for On-Premises)VX9000 (WiNG Distributed)I would touch base wi...
