Hello,Please check out the following article: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000078055This has information as to where you can change the values to re-enable the failback to OS features to allow login.Thanks-Ryan
Hello,Please check out: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000107795Specifically this link may be helpful:https://extreme-networks.my.site.com/ExtrArticleDetail?an=000079835Thank-Ryan
If you're using Extreme OnePolicy if you go into Access Control --> Policy --> Select the policy --> There is a "VLAN Egress" tab at the top. You can use this to add additional egress VLANs to a policy. One thing to note here is that dynamic policy ...
You can enable ZTP+ debug logging in XIQ-Se by going to administration --> Diagnostics --> Server --> Server Diagnostics Set ZTP+ to verbose and click OK. This would should you server side communications.On the device itself there are a number of log...
Hello,Please check the Administration --> Client API access to make sure you have configured API access accordingly. I would also recommend looking into use of this tool: https://github.com/extremenetworks/ExtremeScripting/blob/master/XMC_XIQ-SE/nbi_...
