Hello @hmcmahan,These devices are not made to be standalone. At the very least I would recommend that you register for a Cloud Connect account which will allow you up to 10 devices: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000056841O...
Hello EF,Here are example of AP ports:1 - Uplink: to allow access to the network for wireless clients. By default all ports are open, but you can specify specific allowed VLANs to go through the uplink port.2 - Trunk port: Let's say you have a wirel...
Hello @James_A,1 - Go to ML-Isights > Network 3602 - Select the location you'd like to get data on (under Global View)3 - Click the CLIENTS option 4 - As you can see in the top right corner where it says Now Viewing, the location is set to what you s...
Hello Anthony,About the Hostname In beacon setting:Activate iBeacon for or APs that have internal iBeacon transmitters and that belong to a network policy. Slide the toggle to ON.To use this setting, you must first define the iBeacon service in the a...
Hello @svettori,Here's an article that will outline what speeds to expect: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000116378So it all depends on your configurations. To see what channel width you are currently using you can run the ...
