ExtremeCloud IQ

 View Only
Expand all | Collapse all

Extremecloud IQ multiple APs with CSV file and turning on DHCP?

Jump to Best Answer
  • 1.  Extremecloud IQ multiple APs with CSV file and turning on DHCP?

    Posted 01-21-2022 23:17

    Hey everyone!  When I load multiple APs using an CSV file it sets all the APs to static, is this by default?  I then have to go into each ap and turn the dhcp on.  Is there a way to turn the DHCP on for all the APs I load at once so I don't have to open each up individually?  I would think the DHCP would be the default setting. 


    thanks! 



  • 2.  RE: Extremecloud IQ multiple APs with CSV file and turning on DHCP?
    Best Answer

    Posted 01-24-2022 03:28
    Hi Jon,

    You need to remove all the unused fields from the csv format so that they do not apply. If you don't want to apply static IP addresses to the APs, you should remove "StaticIPAddress" column from the csv template.