The Hub - Home

Open vSwitch on an Auto-Sense port

Hi,I am trying to use the OVS service on a Debian 12 installation. According to the documentation, OVS does not support HMAC authentication for Auto-Attach. If I configure the switch port as FA without authentication, it works; however, when I set it...

ZTP+ Fabric with NAC on edge ports not working (auto-sense enabled)

Hello community,we are looking to set up ZTP+ Fabric, including Extreme Control (NAC), for one of our customers.In this case, the customer wants to minimize the need for CLI-based switch configuration as much as possible.In principle, the onboarding ...

Finding A Client Channel

Hi I'm trying to find a way to see what channel or band a client is on historically when it has only been on an AP for a few minutes.Ideally, Client Trail would include the channel but it doesn't. In the client's Timeline view, If I set it to one hou...

Resolved! Can not capture wireshark

Hi everyone,Here is my configuration.create mirror AnalyzerMirrorenable mirror AnalyzerMirror to port 1 (Destination port)configure mirror AnalyzerMirror add vlan 10 (Source Vlan)But I did not received the traffic when captured the traffic wireshark....

Iphone 17 failed to connect Guest Wi-FI

iPhone 17 fails to connect to the guest Wi-Fi (PSK)when it comes within range of an AP250, but it connects without any issues when it is within range of an AP410C. what could be the problem if anyone know this. I have manually set similar working AP ...