ExtremeSwitching (EXOS/Switch Engine) - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

VOSS (9.0.4) - SMLT - VLACP - FlexUni - FA - to Exos (32.6.2.68) sharing LACP

How to Configure SMLT with VLACP, Flex UNI Port and FA Properly on ExosHi, we are currently using VOSS 9.0.4. Both BeBs are configured with DVR and DVR Leaf Virtual-IST.The switch cluster BeB nodes are working properly and are interconnected via an I...

Resolved! Error: Load sharing cannnot be enabled on ports

Hi,I have a 3 slot switch stack of X460G2-48p-10G4 switches. On this stack, ports 1:50 & 3:50 were shared so that there would be a connection to each of our two core routers. I removed slots 2 & 3 from the stack this morning. I wanted to reconfigure ...

Upgrading X435 switch remotely

Hello,We have an X435 switch that is daisy chained to another switch and then onwards to the internet via a local site WAN router.The second switch was connected to Cloud IQ but has become disconnected. The first switch is still connected. On the sec...

EXOS on GNS3 not booting past BusyBox

Trying to boot EXOS v32.6.3.126 on GNS3 v2.2.50 running as a VM on Hyper-V and cannot get past BusyBox. I don't see anything on the tutorial site about this. The only warning I see during boot is about the CPU:Warning. Could not determine the CPU Fam...

Interconnect multiple stacks

Hello all,I'm pretty new to configures Extreme switches (5320 in my case).At this moment, I have done the following setup.I have 4 floors, each with a stack (1 with 3 switches and 3 with 4 switches. U1-U2 ports are connected in a ring)What is the bes...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN